Henan Bensen Industry Co.,Ltd

Synthetic leather use and care for cars

As cars play an increasingly important part in our daily lives, car owners are demanding more and more faux leather for their cars. Bensen today explains how to use synthetic leather and the steps to take to maintain it.
 
Notes on the use of synthetic leather:

Synthetic faux leather placed to open high temperature (45 ℃) place. Too high a temperature will make synthetic leather appearance change, mutual adhesion. Therefore, auto synthetic leather should not be placed in the fireplace near, also should not be placed in the heater side, and do not let the direct sunlight.
 
Do not place synthetic microfiber leather in areas where the temperature is too low (-20°C). Low temperatures or prolonged exposure to cold air will cause the synthetic leather to freeze, crack and harden.
 
Do not place PU synthetic leather in spaces with high humidity. Excessive humidity will cause the hydrolysis of synthetic leather to occur and develop, causing damage to the surface leather film and shortening its service life.
 
When wiping synthetic faux leather upholstery, please use both dry and water wipe. When wiping with water, the surface should be sufficiently dry, any residual water or moisture may lead to hydrolysis. Do not use bleach as this may cause changes in gloss and colour.
 
Due to the different nature of PU synthetic leather and wood, cotton and linen silk fabrics, high humidity, low temperature, strong light, acid-containing solutions, alkali-containing solutions have an impact on it.

auto microfiber leather

Care should be taken in two areas:
Never place the car synthetic leather in a high temperature place, because this will make the appearance of synthetic leather change, stick to each other, clean with a clean cloth or sponge to absorb dry, or wipe with a wet cloth.
Car synthetic leather fabric to maintain moderate humidity, humidity is too high will hydrolysis leather, damage the surface film; humidity is too low is easy to crack and hardening.

Daily maintenance needs attention:
1. After sitting for a long time should often pat the seat parts and edges, restore the original state, reduce the concentration of sitting force and mechanical fatigue of the slight the phenomenon of denting;
2. Car artificial synthetic leather should be placed away from heat dissipation objects, avoid direct sunlight caused by leather dry crack and fading;
3. Synthetic leather fabric is a synthetic material and requires only simple and basic care. It is recommended to wipe lightly with a neutral detergent containing clean warm water diluted with a soft cloth every week;
4. If a drink is spilt on the leather, it should be immediately soaked up with a clean cloth or sponge and wiped with a damp cloth and allowed to dry naturally;
5. To avoid scratching the PU car leather with sharp objects;
6. To avoid oil stains, ballpoint pens, ink, etc. soiling the PU faux leather. If you find stains etc. on the leather, you should immediately use a leather cleaner, if there is no leather cleaner, use a clean self-towel with a little neutral detergent to lightly blot the stain, wipe off the detergent with a wet towel, and finally wipe clean with a dry towel;
7. Do not contact organic reagents and grease solution;

Leather synthetic fabric try to ensure that the leather in 45 degrees Celsius to - 20 degrees Celsius environment range.

Points to note when handling:
Synthetic faux leather is originally packed in long rolls and belongs to the category of heavy goods. Therefore, attention needs to be paid to safety during manual handling. Avoid overloading and piling up in sheets;
Care needs to be taken during transport and storage to avoid collapse of the goods. When pallets fall off the racks, even if they are only partially dislodged, the fall is very heavy. This is particularly critical when forklift truck aisles are frequented by object pickers and warehouse staff; not only is the cargo at risk, but also the staff;
Do not allow goods to fall from height as this may result in injury to staff and damage to goods;
Use a simple way to load and unload pallets by using pallet positioners, which automatically lift, rotate and lower pallets during loading and unloading;
The pallets are automatically lifted, rotated and lowered during loading and unloading. By keeping the load at a satisfactory height, the operator does not have to spend much time. When handling a layer of boxes, the positioner can be adjusted for height. The worker's job is made easier by simply rotating the positioner, allowing for faster pallet handling and reducing the chance of injury.

Points to note when storing automotive leather:

  • Please pay attention to the method of placing, do not let the goods produce scars or wrinkles;
  • Please do not place auto artificial synthetic leather in direct sunlight to prevent hardening, gloss change, shrinkage, etc;
  • Please do not place it in a hot, humid place to prevent fading, mould, etc.

How to perform daily maintenance:

  1. Use a soft, clean cloth when wiping your car's synthetic leather;
  2. Use a cloth with clean, warm water and wipe dry;
  3. Wash your car's artificial synthetic leather with a cloth containing clean, warm water, diluted with a neutral detergent, wash with warm water and wipe dry.

Auto upholstered leather


Post time: Jan-21-2022

Send your message to us:

Write your message here and send it to us